_edited.png)
PERFECT COVER® BREATHABLE
Perfect Cover® Breathable is a temporary surface and floor protection fleece that is self-adhesive and highly breathable. The upper layer features a multilayer membrane that allows moisture to escape while preventing liquid penetration. This moisture-regulating solution is specifically designed for moisture-sensitive floors such as natural stone and exposed concrete, ideal for newly laid or recently treated surfaces.
Features:
-
Waterproof, highly breathable, non-slip, non-tear, and reusable
-
Made from recycled PET fibers with multilayer breathable membrane
-
Slightly adherent spray-on adhesive on the underside
-
Allows moisture to escape without letting liquids pass through
-
Prevents discoloration and moisture entrapment on natural stone and concrete
-
Reliable professional-grade protection with proven performance
Available in:
Width: 39.37 in (100 cm)
Weight: 0.59 oz/ft² (180 g/m²)
Thickness: 59.06 mils (1.5 mm)
Applications
Natural stone | Exposed concrete | Cement floors | Parquet | Newly laid floors
INSTALLATION INSTRUCTIONS
-
Turn off floor heating before applying
-
Protect against direct solar radiation
-
Avoid continuous pressure above 2400 pounds per square foot (100 kg/m²) for more than 24 hours
-
Respect curing-time guidelines; test on a small area before use
-
Ensure substrate is dry beneath the breathable protective roll. Wait at least 72 hours for the surface to be completely dry before installing the surface protection
-
Maintain room temperature 50–77 °F (10–25 °C) and humidity 50–60%
-
Lay strips with an overlap when needed
Disclaimer / Important
The areas to be covered must not release any solvent vapors. No solvent vapors may be present on top of the areas to be covered. Perfect Cover cannot ensure that the product will be used as suggested. In the rare case of any residue remaining on the surface Perfect Cover was laid down, simply remove the residue by gently wiping it away with a wet (lukewarm water) kitchen cloth or rag, and if necessary, a small amount of hand soap. Perfect Cover is slightly adherent on the bottom. To avoid accidents, the ends of the floor protection fleece need to be taped down.
.png)
SPECIFICATIONS
-
Color: White/Blue
-
Material: Non-woven fabric made of 100% PES fibers
-
Adhesive: Water-based acrylic for secure adhesion
-
Laminated: Laminated with an impermeable, breathable nonwoven
-
Weight: 160 grams per square meter
-
Applications: Covering natural stone, cement-bonded poured floors, parquet, newly laid floors, poured floors
.png)