_edited.png)
PERFECT COVER®
FIRE RETARDANT
Perfect Cover® Fire Retardant is a temporary surface and floor protection fleece for hard, fully cured surfaces. This flame-retardant, self-adhesive protection roll prevents damage from debris, dirt, moisture, paint, wheeled equipment, and falling tools. Designed for areas requiring additional fire safety, it offers certified flame resistance and professional durability.
Features:
-
Waterproof, fire-retardant, non-slip, non-tear, and reusable
-
Made from recycled PET fibers
-
Slightly adherent spray-on adhesive on the underside
-
Certified DIN 4102, Class B1 flame resistance
-
Protects against dirt, moisture, debris, and falling tools
-
Designed for safety-critical work environments
Available in:
Width: 39.37 in (100 cm)
Weight: 0.476 oz/ft² (160 g/m²)
Thickness: 59.06 mils (1.5 mm)
Applications:
Construction | Renovation | Finishing | Painting | Maintenance | Public spaces | Maritime
INSTALLATION INSTRUCTIONS
-
Turn off floor heating before applying
-
Protect against direct solar radiation
-
The film must not endure continuous pressure above 2400 pounds per square foot (100 kg/m²) for more than 24 hours
-
Test on a small area before use
-
Ensure the substrate is dry underneath the protective fleece. Wait at least 72 hours for the surface to be completely dry before installing the surface protection
-
Maintain room temperature 50–77 °F (10–25 °C) and humidity 50–60 %
-
Lay strips with an overlap when needed
Disclaimer / Important
The areas to be covered must not release any solvent vapors. No solvent vapors may be present on top of the areas to be covered. Perfect Cover cannot ensure that the product will be used as suggested. Do not use on newly laid porous stone floors or earthenware slab. In the rare case of a residue remaining on the surface Perfect Cover was laid down, simply remove the residue by gently wiping it away with a wet (lukewarm water) kitchen cloth or rag, and if necessary, a small amount of hand soap. Perfect Cover is slightly adherent on the bottom. To avoid accidents, the ends of the floor protective roll have to be taped down.
SPECIFICATIONS
-
Color: White
-
Material: Non-woven fabric made of 100% PES fibers
-
Fire-Retardant: B1 class certified
-
Adhesive: Water-based acrylic for secure adhesion
-
Laminated: Laminated with a non-breathable film
-
Weight: 0.476 ouncer per square foot (160 grams per square meter)
-
Application: Suitable for LVT, tile, countertops, stairs, and other surfaces
