_edited.png)
PERFECT COVER® VAPOR PRO
Perfect Cover® Vapor PRO is a temporary surface and floor protection fleece with a special vapor-permeable membrane that allows moisture to escape while blocking liquids. It protects floors sensitive to humidity, such as ceramic tiles and wooden floors. The product is designed for any surface, including newly installed or freshly treated surfaces where controlled drying is essential.
Features:
-
Waterproof, vapor-permeable, non-slip, non-tear, and reusable
-
Made from recycled PET fibers
-
Slightly adherent spray-on adhesive on the underside
-
Breathable membrane allows 73.8 oz/yd²/day (2500 g/m²/24 h) vapor transmission
-
No moisture build-up
-
Developed with newly laid or treated floors in mind
Available in:
Width: 39.37 in (100 cm)
Weight: 0.476 oz/ft² (160 g/m²)
Thickness: 83.5 mils (2.12 mm)
Applications:
Ceramic tile | Wood | Laminate | PVC | Natural stone | Smooth floors | Countertops
INSTALLATION INSTRUCTIONS
-
Turn off floor heating before applying
-
Protect against direct solar radiation
-
Avoid continuous pressure above 2400 pounds per square foot (100 kg/m²) for more than 24 hours
-
Respect curing-time guidelines; test on a small area before use
-
Ensure substrate is dry beneath the breathable protective roll. Wait at least 72 hours for the surface to be completely dry before installing the surface protection
-
Maintain room temperature 50–77 °F (10–25 °C) and humidity 50–60 %
-
Lay strips with an overlap when needed
Disclaimer / Important
The areas to be covered must not release any solvent vapors. No solvent vapors may be present on top of the areas to be covered. Perfect Cover cannot ensure that the product will be used as suggested. In the rare case of any residue remaining on the surface Perfect Cover was laid down, simply remove the residue by gently wiping it away with a wet (lukewarm water) kitchen cloth or rag, and if necessary, a small amount of hand soap. Perfect Cover is slightly adherent on the bottom. To avoid accidents, the ends of the floor protection fleece need to be taped down.
SPECIFICATIONS
-
Material: Non-woven made of 100% PES fibers
-
Adhesive: Water-based acrylic
-
Color: Blue
-
Laminated: Laminated with an impermeable, breathable nonwoven
-
Weight: 0.476 ounces per square foot (160 grams per square meter)
-
Applications: suitable for wooden floors, LVT, tile, countertops, stairs, and other surfaces
