_edited.png)
PERFECT COVER® STANDARD
Perfect Cover® Standard is a temporary surface and floor protection fleece that provides outstanding protection during the construction phase against dirt, moisture, wheeled equipment, and falling tools. Designed for professional use on hard, fully cured surfaces, it prevents unnecessary repair costs and ensures a clean, professional working environment.
Features:
-
Waterproof, non-slip, non-tear, and reusable
-
Made from recycled PET fibers
-
Slightly adherent spray-on adhesive on the underside
-
Protects against dirt, debris, moisture, paint, and impact
-
Shock-absorbing, moisture resistant, and easy to reposition
-
Proven durability and professional appearance
Available in:
Width: 39.37 in (100 cm)
Weight: 0.476 oz/ft² (160 g/m²)
Thickness: 59.06 mils (1.5 mm)
Applications:
Construction | Renovation | Finishing | Remodeling | Painting | DIY | Maintenance | Events | Maritime
INSTALLATION INSTRUCTIONS
-
Turn off floor heating before applying
-
Protect against direct solar radiation
-
The film must not endure continuous pressure above 2400 pounds per square foot (100 kg/m²) for more than 24 hours
-
Test on a small area before use
-
Ensure the substrate is dry underneath the protective fleece. Wait at least 72 hours for the surface to be completely dry before installing the surface protection
-
Maintain room temperature 50–77 °F (10–25 °C) and humidity 50–60 %
-
Lay strips with an overlap when needed
Disclaimer / Important
The areas to be covered must not release any solvent vapors. No solvent vapors may be present on top of the areas to be covered. Perfect Cover cannot ensure that the product will be used as intended. Do not use on newly laid porous stone floors or earthenware slab. In the rare case of any residue remaining on the surface Perfect Cover was laid down, simply remove the residue by gently wiping it away with a wet (lukewarm water) kitchen cloth or rag, and if necessary, a small amount of hand soap. Perfect Cover is slightly adherent on the bottom. To avoid accidents, the ends of the floor protection fleece need to be taped down.
SPECIFICATIONS
-
Color: White
-
Material: Non-woven fabric made of 100% PES fibers
-
Adhesive: Water-based acrylic for secure adhesion
-
Laminated: Laminated with a non-breathable film
-
Weight: 0.476 ounces per square foot (160 grams per square meter)
-
Application: Suitable for LVT, tile, countertops, stairs, and other surfaces
