_edited.png)
PERFECT COVER® EXTRA STRONG
Perfect Cover® Extra Strong is a temporary surface and floor protection roll with a heavy-duty 3-layer structure. Specially developed for prefabricated elements and projects requiring extra strength, it provides optimal protection against moisture and mechanical damage throughout the entire construction phase.
Features:
-
Waterproof, non-slip, non-tear, and reusable
-
Three-layer structure with viscose top and polypropylene base
-
Slightly adherent spray-on adhesive on the underside
-
Resistant to mechanical impact and moisture
-
Designed for high-traffic areas and prefabricated components
-
Professional-grade performance for long-term use
Available in:
Width: 39.37 in (100 cm)
Weight: 1.147 oz/ft² (350 g/m²)
Thickness: >78.74 mils (>2 mm)
Applications:
Construction | Prefabrication | Heavy-duty projects | Renovation | Industrial interiors
INSTALLATION INSTRUCTIONS
-
Turn off floor heating before applying
-
Protect against direct solar radiation
-
The film must not endure continuous pressure above 2400 pounds per square foot (100 kg/m²) for more than 24 hours
-
Test on a small area before use
-
Ensure the substrate is dry underneath the protective fleece. Wait at least 72 hours for the surface to be completely dry before installing the surface protection
-
Maintain room temperature 50–77 °F (10–25 °C) and humidity 50–60 %
-
Lay strips with an overlap when needed
Disclaimer / Important
The areas to be covered must not release any solvent vapors. No solvent vapors may be present on top of the areas to be covered. Perfect Cover cannot ensure that the product will be used as suggested. In the rare case of any residue remaining on the surface Perfect Cover was laid down, simply remove the residue by gently wiping it away with a wet (lukewarm water) kitchen cloth or rag, and if necessary, a small amount of hand soap. Perfect Cover is slightly adherent on the bottom. To avoid accidents, the ends of the floor protection fleece need to be taped down.
.png)
.png)
SPECIFICATIONS
-
Color: Gray
-
Material: Multi-layer construction with self-adhesive underside
-
Adhesive: Self-adhesive for secure placement
-
Laminated: Three-layer design for extra strength
-
Weight: 1.147 ounces per square foot (350 grams per square meter)
-
Applications: Suitable for prefabricated elements, high-traffic areas, stainless steel, stairs, elevators, cabinets, and glass
.png)