V-PRO® SELF-ADHESIVE VAPOR-PERMEABLE
Self-Adhesive Vapor-Permeable has a liquid-tight top layer and a self-adhesive underside, which has been specially developed for all hard and smooth floors such as: laminate, PVC, tiles, plastic floors and stairs. Ideally suited for painting, plastering, moving and (re) building.
Self-Adhesive Vapor-Permeable has been specially developed for floors that are sensitive to moisture such as ceramic tiles and wooden floors. The substrate must be dust-free, smooth, clean and free from chemicals. The processing temperature is between 5 and 40 degrees Celsius. Runs must be laid with an overlap of approximately 10 cm. Pre-testing is always recommended.
V-PRO Vapor-Permeable has the highest quality with properties such as anti-slip, liquid-proof, shock-absorbing, breathable and self-adhesive. Tape is therefore no longer necessary. Finally, the product is made from recycled polyester fleece with an extra PE top layer. The special membrane allows moisture to escape and prevents the ingress of liquids. The breathable fleece allows 70 grams per m² per 24 hours to pass through.
V-PRO Vapor-Permeable is not suitable for porous stone floors, natural stone floors, clay tiles and recently laid concrete. In addition, the product can be used for a maximum of 3 months. The underfloor heating must also be switched off.
OUR COMMITMENT TO YOUR SUCCESS
± 39.4 inch
8.8lb or 17.6lb
PE film on the top
We are committed to building enduring partnerships through a focus on long-term relationships. In pursuit of this goal and to maximize our mutual success, here is what we do for you:
Provide comprehensive details and images for commercial products.
Offering detailed technical specifications for products.
Helping you showcase the product both in-store and on digital platforms.
An open door policy, with honest and fast communication with our customers.
Proactively address your specific customer needs through personalised interaction.