Self-Adhesive Vapor-Permeable has a liquid-tight top layer and a self-adhesive underside, which has been specially developed for all hard and smooth floors such as: laminate, PVC, tiles, plastic floors and stairs. Ideally suited for painting, plastering, moving and (re) building.

V-PRO self-adhesive Vapor-Permeable

Product description

Self-Adhesive Vapor-Permeable has been specially developed for floors that are sensitive to moisture such as ceramic tiles and wooden floors. The substrate must be dust-free, smooth, clean and free from chemicals. The processing temperature is between 5 and 40 degrees Celsius. Runs must be laid with an overlap of approximately 10 cm. Pre-testing is always recommended.


Self-Adhesive Vapor-Permeable has the highest quality with properties such as anti-slip, liquid-proof, shock-absorbing, breathable and self-adhesive. Tape is therefore no longer necessary. Finally, the product is made from recycled polyester fleece with an extra PE top layer. The special membrane allows moisture to escape and prevents the ingress of liquids. The breathable fleece allows 70 grams per m² per 24 hours to pass through.


Self-Adhesive Vapor-Permeable is not suitable for porous stone floors, natural stone floors, clay tiles and recently laid concrete. In addition, the product can be used for a maximum of 3 months. The underfloor heating must also be switched off.

Your advantage

Verbo focuses on long-term relationships so that a partnership is created. To realize this and achieve more together, we can do the following for you:


  • Providing commercial product information and product photos


  • Providing technical product specifications


  • Helping present your product both physically and online


  • An open door policy with honest and fast communication


  • Thinking along with your specific customer requests, personally, by email or by telephone.


Available in







Self adhesive

269² ft and 538² ft


160 grams per m²


PE film on the top