
Specifications
Available in
Width
Weight
Coated
​
Waterproof
Absorbent
Breathable
Self adhesive
269² ft and 538² ft
± 39.4 inch
9.9lb or 19.8lb
Breathable layer on top
Yes
No
​
Yes
Yes

DESCRIPTION
Description
Self-Adhesive Standard is suitable for dry surfaces. The substrate must be dust-free, smooth, clean and free from chemicals. The cover fleece provides protection against dirt, moisture, rolling stock and falling tools. The processing temperature is between 5 and 40 degrees Celsius. Runs must be laid with an overlap of approximately 10 cm. Pre-testing is always recommended.
Self-Adhesive Standard has the highest quality with properties such as liquid-tight, shock-absorbing, reusable and self-adhesive. Due to the latter, the use of tape is no longer necessary. Finally, the product is made from recycled polyester fleece with an extra PE top layer.
Self-Adhesive Standard is not suitable for floors that have recently been laid, porous stone floors, natural stone floors, clay tiles and recently laid concrete. In addition, the product can be used for a maximum of 3 months. The underfloor heating must also be switched off.
Your Advantage
Verbo focuses on long-term relationships so that a partnership is created.To realize this and achieve more together, we can do the following for you:
-
Supplying commercial product information and product photos
-
Providing technical product specifications
-
Helping present your product both physically and online
-
An open door policy with honest and fast communication
-
Thinking along with your specific customer requests, personally, by email or by telephone.

ADVANTAGE