_edited.png)
V-PRO®
Self-Adhesive
Absorbent
Self-Adhesive Absorbent has a liquid-tight top layer and a self-adhesive underside, which has been specially developed for all hard and smooth floors such as: laminate, PVC, tiles, plastic floors and stairs. Ideally suited for painting, plastering, moving and (re) building.
Specifications
Available in
Width
Weight
Coated
Waterproof
Absorbent
Breathable
Self adhesive
269² ft and 538² ft
± 39.4 inch
13.2lb or 26.5lb
Absorbent layer on top
Yes
Yes
No
Yes
DESCRIPTION
Description
Self-Adhesive Absorbent has a top layer that can absorb up to 1 liter (1L). The substrate must be dust-free, smooth, clean and free from chemicals. The processing temperature is between 5 and 40 degrees Celsius. Runs must be laid with an overlap of approximately 10 cm. Pre-testing is always recommended.
Self-Adhesive Absorbent has the highest quality with properties such as anti-slip, shock-absorbing, self-adhesive liquid absorbing. Tape is therefore no longer necessary. The product is made from recycled polyester fleece with an absorbent top layer that can absorb large amounts of liquids including oil, water, lacquer and paint.
Self-Adhesive Absorbent is not suitable for porous stone floors, natural stone floors, clay tiles and recently laid concrete. In addition, the product can be used for a maximum of 3 months. The underfloor heating must also be switched off.
Your Advantage
Verbo focuses on long-term relationships so that a partnership is created.To realize this and achieve more together, we can do the following for you:
-
Supplying commercial product information and product photos
-
Providing technical product specifications
-
Helping present your product both physically and online
-
An open door policy with honest and fast communication
-
Thinking along with your specific customer requests, personally, by email or by telephone.
ADVANTAGE